Duration Power Rechargable emergency light
Duration Power LED Emergency Light Functions:
Model No.: DP-7123
Battery Capacity: 2600mAh
Voltage: AC 100—240V 50/60Hz
Current: AC 0.12A 1.2W
Power factor: 0.1
Light Source Power: 6W
SMD LED Chip:36 SMD LEDs.
Stepless Adjustment:Adjusted Freely Brightness.
DC Input: DC 5-7V 0.6A (Can use the solar panel)
Charging Time: 10 Hours
Using Time: 3 -6Hours
Made In China
Duration Power LED Emergency Light Instructions :
Connect the power supply, if charging indicator turns on, then it’s in charging status. Charging time needs about 10 hours.
If it is recharged through sun power, the output working voltage is 5-7V, output working current is 0.6A.
If it is recharged through charger, the output working voltage is 6V, output working current is 0.6A.
When the light becomes weak during using, that means the battery is in lack of power. At this moment, stop using it and recharge it in time so as to protect the battery. Recharge it before the light is completely invisible, otherwise it will case damage to the battery.
Frequent use is required, long-time nonuse is unadvisable. If you don’t use it very often, please recharge it every 3 months, or the battery’s life-span will be shortened.
Duration Power LED Emergency Light Technical Parameters :
Materials: | ABS
|
Color: | white |
Type of LED: | SMD |
Number of LED: | 60PCS |
Maximum wattage: | 6W |
Lamp color temperature: | 5500-6000K |
Lamp lifetime up to: | 35, 000HRS |
Lamp brightness: | Luminous flux, 3200LM |
Lamp illumination: | >200lux 30CM |
Color rendering index: | > 80RA |
Battery Capacity: | 2500mAh |
Duration Power LED Emergency Light Caution :
Do not point the light to eyes directly, or it will affect eyesight. Children must be supervised by adults before using it.
Keep it away from rain and dampness.
Keep it away from the explosives and inflammables while it is charging.
Duration Power LED Emergency Light More Photos & aging test :